PULLSETTERS - PS400

Pullsetter Direct Drive 400 RPM 5/16-3/8 Capacity

Specs

Capacity in. (mm)	5/16 - 3/8 (M8 - M10)

Style	Pistol

Free Speed rpm	400

Length in. (mm)	8.1/8 (206)

Air Cons. cfm (cmm)	5 (0.14)

Noise Level dB(A)	60

Weight lbs (kgs)	2.75 (1.25)

Air Inlet (NPT)	1/4

PS400
136256

Pullsetter Direct Drive 400 RPM 5/16-3/8 Capacity
Series: ELITE SERIES

Add to Quote Sheet

Parts Breakdown

Features

The Acu-Pull pullsetter tool provides a quick and easy way to install a threaded rivet nut in applications where a strong thread is required. Will work with most threaded rivet nut manufacturers.

"Quick-Change" nose-piece assembly allows you to change the nose-piece size in less than 30 seconds.

Air motor stalls out upon reaching torque

BEST PRACTICE TIP: It is best to do some test pulls on scrap material in order to arrive at the optimal air pressure (torque) setting which gives the desired result. Start with a low air pressure (torque) setting and increase gradually, especially when pulling aluminum inserts. When the air pressure (torque) is set too high you risk stripping the thread on the insert.

Torque adjusted by air pressure

Nose-piece assembly sold separately

Related and/or Featured Products

PULLSETTERS - PS400

PS400 136256

Related and/or Featured Products

PS400
136256